LED Signs Controlled by TCP/IP

Use a Intranet Connection to control your LED Signs

Yes you can control your LED Signs over an Intranet using our LED Signs TCP/IP device.
Return To: LED Signs Programmable

Here is one example for TCP/IP controlled Signage. There is a school looking for 100pcs of LED Programmable Display Signs. Those signs are required to have messages programmed by one computer / a central computer from administration. Each unit is connected with the Ethernet cable to the server, and the administration programs messages and send it via TCP/IP. All signs get the messages instead of programming one at the time.

Please Note: The RS232 cable comes with our sign package and the Ethernet cable needs to be purchased locally.

Please Note: Does not work with the Promo Series LED signs.

Here is a list of the LED Signs that are compatible with the TCP/IP device:
One Line LED Signs

SVV-L-60X7-SO-R2B2
SVV-L-60X7-SO-B2
SVV-L-60X7-SO-R2
SVV-L-60X7-SO-R2G2
SVV-L-60X7-SO-R2PG1
SVV-L-60X7-SO-R2PG2
SVV-L-60X7-SO-R1G1
SVV-L-60X7-SO-Y2
SVV-M-50X7-R
SVV-M-50X7-RG
SVV-ML-80X7-R
SVV-ML-80X7-RG
SVV-ML-80X7-SO-B
SVV-ML-80X7-SO-R

SVV-ML-80X7-SO-Y
SVV-XL-80X7-SO-B2
SVV-XL-80X7-SO-R2
SVV-XL-80X7-SO-R1G1
SVV-XL-80X7-SO-R2G2
SVV-XL-80X7-SO-R2B2
SVV-XL-80X7-SO-R2PG1
SVV-XL-80X7-SO-R2PG2
SVV-XL-80X7-SO-Y2

Two Line LED Signs
SVV-DO-128X16-ID-R-RC
SVV-DO-128X16-ID-RG-RC
SVV-DO-192X16-ID-RG
SVV-DO-256X16-ID-RG

Here are the steps for the connection of a TCP/IP device and your LED sign.

Signal from TCP/IP Converter	Cat5 cable, signal from PC via IP address

5VDC Power In		9 VDC Power In
RS232, Signal from TCP/IP Converter

Fix the TCP/IP device on the back of LED sign by using of 2-sided double stick tape.
Connect the Cat5 cable to the TCP/IP device, through local intranet.
Connect one end of RS232 cable to the TCP/IP device, and another end to the RJ45 of the LED sign.
Connect the Power plugs to TCP/IP device and LED sign, respectively.
Power on the adaptors of TCP/IP device and LED sign, respectively.
LED Sign will be running automatically.
Repeat the steps 1-6 to connect more LED signs, up to 250pcs in maximum, into the local intranet.
Connect your PC into the intranet as well, finally, the connections of LED signs, TCP/IP devices and computer will be similar to the following picture:

TCP-IP_connection_example_3.jpg - 54541 Bytes

Software Operation

1) Input your messages

TCP-IP_connection_example_4.jpg - 19141 Bytes

2) Choose TCP/IP to upload your new messages

Input the IP address of LED sign
Click SEND to upload your new messages
You will see the LED screen is displaying new messages.

TCP-IP_connection_example_5.jpg - 22243 Bytes